你的位置：首頁 > 產品展示 > > 反應/結晶罐 >結晶罐
產品詳細頁
結晶罐
- 產品型號：
- 更新時間：2024-09-01
- 產品介紹：結晶罐采用進口304或316L不銹鋼制作，內壁采用機械拋光或電解鏡面拋光，外壁采用304全焊接結構保溫，外表面采用鏡面或亞光處理。
- 在線留言
產品介紹
結晶罐Crystallization Tank
l 結晶罐采用進口304或316L不銹鋼制作，內壁采用機械拋光或電解鏡面拋光，外壁采用304全焊接結構保溫，外表面采用鏡面或亞光處理。
l 結晶罐上安裝0.22um呼吸器。
l 結晶罐能承受121℃高溫滅菌消毒，配備衛生級壓力表。
l 罐體對外連接口采用衛生快開接頭。
l 結晶罐帶有溫度監控裝置，2個視鏡，清洗球及氮氣進口、溫度計口等接口。
l 軸的密封采用特殊的衛生級機械密封設計，確保物料不受污染。
l 結晶罐可采用變頻調整裝置，攪拌軸轉速調節范圍大。
l The crystallization tank is made of imported 304 or 316L stainless steel, the inner wall is mechanically polished or electrolytic mirror polished, the outer wall is insulated with a 304 fully welded structure, and the outer surface is treated with mirror or matt finish.
l Install a 0.22um respirator on the crystallization tank.
l The crystallization tank can withstand high-temperature sterilization and disinfection at 121 ℃, and is equipped with a sanitary pressure gauge.
l The external connection port of the tank body adopts a sanitary quick opening joint.
l The crystallization tank is equipped with a temperature monitoring device, 2 mirrors, cleaning balls, nitrogen inlet, thermometer port, and other interfaces.
l The shaft seal adopts a special sanitary mechanical seal design to ensure that materials are not contaminated.
l The crystallization tank can adopt a frequency conversion adjustment device, with a wide adjustment range of mixing shaft rotation speed.
產品圖/Product Picture
應用領域/Application Area
